W720 Long Reach (Unsupported)
The W720 Long Reach (unsupported) bottom loading/unloading arm is ideal for transferring compressed gas liquids and vapors to or from tank trucks or rail cars. The W720’s long reach enables greater flexibility with miss-spotting or obstructions from other rail car and tank truck equipment
The W720’s long reach and significant miss-spot capabilities are due to a swivel boom that extends “unsupported” from the riser on the stand post. This provides an extra plane or rotation and allows the loading arm to track a distance along the bottom side of a rail car, or bottom side or rear of a tank truck.
The W720 is available in 2”, 3” x 2”, and 3” if required. Made from all carbon steel or
stainless steel. Swivel joints are all split flange WL2 dual race, or WSS single race with
seal material to suit the compressed gas and vapor being handled.
Available in Left Hand or Right Hand, Up-feed, Down-feed and Side-feed configurations
Typical range of vertical movement is +50° park position to -10° load position. Typical boom length of 1500mm. Primary length is 1,500 mm to 2,000mm with an Outboard 2-plane Style-70 swivel joint and operating handle. All dimensions can be changed to suit each application.
An isolation valve can be incorporated and outboard connections can be dry-gas coupler, hammer union or lap flange to suit the application. Breakaway couplings, remote shut down devices and purge systems can be incorporated as required.
See Compressed Gas Loading Arm Options tab for more options